Contents
No.5 2026
- Cover of Vol. 23 No. 5
- Contents of Vol. 23 No. 5
- A review on approaches to evaluate quality of molten aluminum alloys
- Microstructure and mechanical properties of additively manufactured Invar alloys: A critical review
- Influence of carbon on microstructural stability and stress rupture properties of an additively manufactured superalloy
- Effects of heat treatment on microstructure and damping capacity of cast Fe42.75Mn19Co19Cr14.25Al5 high-entropy alloy
- Formation and evolution of second phase particles in 1060 aluminum alloy sheet produced by twin-roll casting and annealing
- Improvement of microstructure and mechanical properties of Ti42Al6Nb2.6C alloy through Er doping and in-situ formation of Er2O3 particles
- High-temperature oxidation of Si/SiMo ductile cast irons in aggressive combustion atmosphere - oxidized surface layer characteristics
- Optimizing the connection mode between two diameter-varied conformal cooling channels in a selective laser melting-fabricated mold
- Thermal expansion behavior and mechanical properties of zirconia toughened alumina reinforced high chromium cast iron matrix composites
- Deformation behavior of as-cast Ni-based superalloy under wide temperature range with low strain rates
- Effect of Al-8Sr-8Ce master-alloy content on microstructure and mechanical properties of Al-15Mg2Si alloy
- Numerical simulation on macrosegregation of ingots with dynamic shrinkage porosity and dendrite microstructure
- Preparation and compositional distribution of a TA17 titanium alloy ingot via a novel semi-continuous induction melting process
- Effect of Ca addition on microstructure, mechanical properties, solidification behavior, and fluidity of cast Mg-4Zn-xCa-0.3Zr alloys